CE认证机构-南京睿督 025-8658 3475

 建筑产品CE认证在迄今为止很长的一段时间之内，一直都是遵循CPD指令，即construction product directive（89/106/EEC）。

 欧盟建材CE认证并不是随便任何一家机构都能做的，而是必须由欧盟委员会认可的具有相应产品CE认证所需对应的欧洲标准资质能力的公告机构来进行测试认证并颁发CE证书。

 颜料CE认证是欧盟对与颜料产品的一种强制性认证，目前所有在欧洲市场销售的颜料产品，必须根据EN 12878进行CE认证并加贴CE标识。

...

自2013年7月1日起，欧盟颁布的建筑产品法规Regulation(EU)No 305/2011(简称CPR)将全面取代原来的建筑产品CE CPD指令，进入强制实施阶段。自2013年7月1日起，欧盟颁布的建筑产品法规Regulation(EU)No 305/2011(简称CPR)将全面取代原来的建筑产品CE CPD指令，进入强制实施阶段。

自2013年7月1日起，欧盟颁布的建筑产品法规Regulation(EU)No 305/2011(简称CPR)将全面取代原来的建筑产品CE CPD指令，进入强制实施阶段。CPR新法规对进入欧盟市场的建筑产品制造商、贸易商、进口商和分销商等与产品流通相关的环节做了全新的要求，须按照统一的性能评价办法，确保有关建筑产品性能的信息真实可靠，且所有涉及到健康、安全、环保的建筑产品，必须加贴CE标志（CE标签），否则不准进入欧盟市场流通。为了使国内更加顺利的进行欧盟市场，南京睿督公司将会提供建筑产品CE认证专业权威的服务。

EN14313 Thermal insulation products for building equipment and industrial installations -Factory made polyethylene foam（PEF）products-Specification.
EN14313工业装置和建筑设备用隔热产品工厂制聚乙烯泡沫(PEF)产品规范

EN14313标准范围

The EN14313 Standard specifies the requirements for factory made flexible polyethylene foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately -80℃ to +150℃.

EN14309 Thermal insulation products for building equipment and industrial installations -Factory made expanded polystyrene（EPS）products-Specification.
EN14309 工业装置和建筑设备用热绝缘产品. 工厂制发泡聚苯乙烯(EPS)产品.

EN14309标准范围

The EN14309 Standard specifies the requirements for factory made products of expanded polystyrene which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately -180℃ to +80℃. Modified expanded polystyrene polymers with a higher temperature resistance are also covered by this standard.

EN14307 Thermal insulation products for building equipment and industrial installations -Factory made extruded polystyrene foam（XPS）products-Specification.
EN14307建筑设备和工业设施用隔热制品.工厂制挤压泡沫聚苯乙烯(XPS)产品.规范。

EN14307标准范围
The EN14307 Standard specifies the requirements for factory made extruded polystyrene foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately -180℃ to +75℃。

EN14308:2009 Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products - Specification
EN14308:2009 建筑设备和工业装置的隔热保温产品. 硬质聚氨酯泡沫及聚异氰脲酸酯产品.

EN12467:2004 +A1:2005/+A2:2006 Fibre-cement flat sheets-product specification and test methods. 纤维水泥平板材，产品规范和试验方法.

The EN12467 document specifies the technical requirement and established methods of inspection and test as well as acceptance conditions for fiber-cement flat sheets, siding shingles and planks(referred to as sheets later in this document) for one or more of the following uses:
...